Git pull without checkout?
I'm used to running git pull and other commands from within a branch I'm working on. But I have set up a development server that several people work on, so I don't want to have to switch branches when I do it. If I want to update an existing branch on the dev server from the github repository we all use, what would be the right way to do that? If I run the command 'git pull github branchname' will that simply pull the branch into the current branch?
All of the git examples I can find seem to indicate that you run 'checkout branchname' first, then do the pull. I'm trying to avoid that. As I said, this is an existing branch and I just want to update to the latest version.
We have some company middleware and sometimes its difficult to find the correct version Im looking for so I often have to update to different versions to test them. I usually checkout: svn co svn+ssh:
I have a repository full of zip files, re-compressing theses files will be a waste of time. I've tried to set core.compression = 0 on the remote and the local copy without success git config core.comp
I'm new in git, i met problem, and don't know how to resolve this. I want to pull project and if any conflict appear resolve conflict using my changes. How can i do this ?
I have a local branch master tracking a remote branch origin/master. When I checkout master like this: git checkout refs/heads/master I end up with a detached HEAD: Note: checking out 'refs/head
When I say 'git checkout ' I want zsh to autocomplete names of my git branches. Is that possible?
What is the difference between git pull origin master and git pull origin/master ?
I'm trying to do a git pull and I'm getting error: Your local changes to 'someDir/someFile' would be overwritten by merge. Aborting. this is fine since I need to check these changes and decide whether
I'm using MochaHost as hosting, which does not include SSH access (unbelievable). The problem is that I'm using Git for most of my projects now, and I need to deploy them in the hosting. Tech support
After git pull I have done git reset hard to undo the merge with commit id before merge.Somehow my entire commit is gone and I cant the see the commit in history also. But I have the commit id , on gi
Pulling without any local commits deletes staged files without warning. How can one recover those files? Here is an example showing the issue: ~/git $ git --version git version 188.8.131.52 ~/git $ uname -
I am new to git and I want to start doing things 'properly'. I quite like this flow: git checkout -b featurebranch git commit -m some changes // manytimes * git pull // update master to origin's hea
I am new to git. I have a few local commits but I want to pull the latest code from the repository and don't yet want to push mine. However git pull, creates unnecessary merges. What is the right way
after checkout to the desired branch: git checkout feature/myBranch I want to pull the project contained in this branch to my local repository, how can i do that please.
Since last 5 years i have been working with SVN and i am new boy to GIT i have few confusions regarding git repository usage for basic operations and by looking at many tutorial and videos could not f
I work on a project that has 2 branches, A and B. I typically work on branch A, and merge stuff from branch B. For the merging, I would typically do: git merge origin/branchB However, I would also li
My personal repository has some repositories as submodules. And the following command $ git submodule foreach git pull origin master was faced with the following result right after entering ruby repo
If I want to replace a folder on a working branch with the same folder from another branch, I can call: git checkout OTHER_BRANCH -- /path/to/folder what is the meaning of the -- ?
When I use Git checkout master~X, I will get the Xth merged commit, what I really want is the Xth real commit (not merged commits only). How can I do that? Thanks.
I have a question regarding git repository management. Lets say I want to create a new branch from 'develop' for a patch. Easy enough: sudo git checkout develop && sudo git checkout -b test-pa
I had hoped this would work: git checkout remote/tag_name but it doesn't. This does: git checkout tags/tag_name but I'm doing something weird where I have a lot of remotes, and I'm worried about wha
I wrote a shell script to do project releasing with Git, in the shell script I first cd to the Git working copy and then do git pull origin master. But it prompts me for password: git@localhost's pass
Say I have a branch A, and from that I branch B. I make a bunch of changes on A, then checkout B and do a git pull. Now I make a change on B but realize that it should've been in A. If I now try to gi
I'm working on project located in Github. Now I have made changes to the project and I want to do a pull request. I'm using this command : git pull but I get * branch master -> FETCH_HEAD Already
I want to ignore a file/directory tree that was previously tracked - ignore it forever but have it not being deleted on a pull - just have it ignored on the repository the pull happened. Is this possi
This error probaby has something to do with my path/environment variables but I don't know enough about those to fix this issue, any help is appreciated. git pull git: 'pull' is not a git command. See
I have cloned a remote Git server. but when I want to checkout it with the below code it give me error: $ git checkout master origin/master error: pathspec 'origin/master' did not match any file(s) kn
This question already has an answer here: What are the differences between 'git pull' and 'git fetch'? 19 answers So - can someone clarify this one: I run: git pull origin master git status A
I was reading this article http://supercollider.github.io/development/git-cheat-sheet.html, which proposed the following workflow: git checkout master git pull --rebase # update local from remote git
I'm not sure what I'm doing differently, My desired behaviour is: $ git checkout master error: Your local changes to the following files would be overwritten by checkout: test.py Please, commit your
Is there a difference between git rebase upstream/master and git pull --rebase upstream master, and if so, what? The remote could be any remote, not necessarily upstream.
Sometimes, esp. when I'm the only one working on a remote repository, I like rewriting the history with git rebase -i and git push origin master -f. How do I do a forced git pull origin master without
What's the difference between 'git pull' and 'git fetch'? The question above's top answer says In the simplest terms, git pull does a git fetch followed by git merge or git rebase. I understand th
What is the difference between git branch --track and git checkout -b --track, if there is any?
everyday I come into work and I do a git pull to get all the updated code in my develop branch.. can someone please tell me a why before I do my pull to see what changed
Is it possible to do the equivalent of git checkout from within Eclipse using the EGit plugin? I have a file that's been modified. I want to discards the changes and revert the file back to what's in
Are the following combinations of commands equivalent? Combo #1: git revert HEAD git revert HEAD Combo #2: git revert HEAD git checkout HEAD^ git commit Related thread: Git cancel a revert
In Git I did a checkout to a previous version of our program because there were some errors in the most recent commit, but I was working with different files and needed a working copy. The errors have
I am on master branch and I did 2 local commits(not pushed) on top of commit which is pushed to remote. I want to to get my local working master branch in sync with remote.So i ran the command git che
I am very new to coding, can someone help me on how I can successfully execute git pull with cron job. I did write a Shell script that has git pull as follows and when I run the shell script on the te
I am trying to push a branch I am working on to its remote branch. I was getting the message: error: failed to push some refs to 'website.git' hint: Updates were rejected because the tip of your curre
I am working on a project where there are a number of submodules. Yesterday, everything was peachy, app was running, etc. After I ran git submodules update this morning, I receive an error in the appl
How I can do this in one command on MacOSX? git stash git pull origin master git stash pop I've tried with git stash && git pull origin mater && git stash apply and works fine.
I run: git checkout mygithub/master but for some reason, running 'git status' shows not currently on any branch. Running: git checkout master and then git status, says that I'm now on branch mas
Is there a way to see what commits have been pulled in from the remote repository after you do a git pull --rebase? In other words: git pull will show a summary of changed files at the end (like git
I am working on a localization framework that managaes the text-assets for several applications (wpf,android,ios) in a library. We use git as the version control system for all the applications. Now I
Why is the git command to switch branches named git checkout? Does it really make sense ? I would name it git switch instead. Besides, git checkout has other meanings: e.g. reverting a file (like svn
What are the differences between these commands?: # 1 git pull # 2 git pull origin # 3 git pull origin master # 4 git pull origin/master # 5 git pull origin HEAD:master
Is there any way to set up git such that it listens for updates from a remote repo and will pull whenever something changes? The use case is I want to deploy a web app using git (so I get version cont
I have some trouble with git checkout tools in Bamboo. It works too long. For example I have two repos. I can clone them to local machine in 5-10 minutes. But checkout task stucks at Fetching 'refs/
I am new to git and trying to wrap my head around the way branches work. According to the documentation git checkout Updates files in the working tree to match the version in the index or the specifi