Specify '--remote' Heroku app based on git branch
Is it possible to to target an app version in Heroku based on the current Git branch? In the Heroku docs, its specifies how to target a a specific version of the app.
# run command on 'production'
$ heroku run rake db:migrate --remote production
To make things easier, you can use your git config to specify a default app. For example, if you wanted “staging” do be your default remote, you could set it with the following command:
$ git config heroku.remote staging
It would make sense to have the local development branch push to the development app and the local production branch push to the production app.
I got this message from Git: You asked to pull from the remote 'origin', but did not specify a branch. Because this is not the default configured remote for your current branch, you must specify a br
As far as I understand these two commands can remove remote-tracking branches. Is there any difference between them? git remote prune <branch_name> git branch -d -r <branch_name>
I have a strange git scenario: I've been developing on master, and ive noticed that when my CI clones down and attempts to modify a git repository, it doesn't see master in the refspec. Thus, the co
I have two remote branches: feature233 v1.9.12. I need to rename the 1. branch to v1.9.12 and the 2. branch to v1.9.15 : feature233 --> v1.9.12 v1.9.12 --> v1.9.15 Since the new name of t
What is the difference between running git submodule update --remote vs cd <submodule directoy> git pull Assuming that the submodule was previously set to track some branch: git submodule ad
The usual command is: git checkout origin/branch_i_want -b branch_i_want Git responds with: Branch branch_i_want setup to track remote branch branch_i_want from origin. This is fine. My question is
i tried first sample Facebook App on Heroku in this command prompt i write like this 1)$git remote 2)$git remote add heroku firstname.lastname@example.org:stellent.git responses like this not a repository (or any o
Possible Duplicates: How do I push amended commit to the remote git repo? Undoing a git push Hi, I've deleted some commits from my master branch by using git reset --hard SHA_VALUE I have, however
I know this has been asked, I've seen so my responses on it, but nothing seems to work. Here was my workflow. Create a new branch and work on it. Sometimes I use multiple computers so I pushed it to r
I am on a repo on github. I have one local branch called : master and on the remote repo there are two branches, branch1 and branch2. I cloned the repo from the branch1. But then, I wanted to pull bra
I want to deploy a Play 2.0.4 app on Heroku using git push heroku master but I have moved the play root folder into a sub folder of my git repo. Is there a way to deploy from there? Currently it misid
Remotes: origin $ git branch * master $ git checkout -b new_feature Now I do couple of commits on new_feature branch and want to push it to origin after updating it. $ git branch master * new _fe
I make a new Heroku app inside of my current app directory using Heroku create and ran this: MyMac:bodb pawel$ git push heroku master Counting objects: 359, done. Delta compression using up to 2 threa
How can I see the diff between a local branch and a remote branch?
I'm having trouble comparing local master (which is on same commit as origin/master) with production/master. $ git remote -v origin email@example.com:mydomain/mydomain.git (fetch) origin firstname.lastname@example.org:m
I have a local branch tracking the remote/master branch. After running git-pull and git-log, the log will show all commits in the remote tracking branch as well as the current branch. However, because
Subtrees in Git work nicely although some git commands remain to be supported for subtrees. Here's the question: How to make the subtree pull from a different remote branch like stable or integra
I am using Netbeans, and there is a feature call Push to Upstream. When I click it I get this message: No tracked remote branch specified for local master Is there a way to track the remote branch i
I have a branch I've already pushed to github using --set-upstream. I want to rename it now, and have that change reflected on github. Here's what I want to do git branch -m oldbranch newbranch git pu
This question already has an answer here: Force Git to overwrite local files on pull 25 answers I want to sync the local branch with the remote git branch. I tried to do git pull but it fails w
Lets' say I had a branch named coolbranch in my repository. Now, I decided to delete it (both remotely and locally) with: git push origin :coolbranch git branch -D coolbranch Great! Now the branch is
I'm currently testing out deploying websites via Git and am having trouble understanding the following: Currently, I have a bare remote repo on my DEV environment with a post-receive hook which sets G
Say I have an arbitrary local git working directory that was cloned from some remote. I want to make the local git repository be EXACTLY the same as the remote, irrespective of what's happened to the
I know the slug compiler removes the .git directory when creating a heroku slug, but is there any way to configure Heroku so that I can access the currently running git commit number from within my sc
I find it little confusing to know the difference between git branch --set-upstream-to vs git remote add origin or even git remote add upstream Basically I have a bare repository created with git init
I'm trying to deploy my heroku application using a different branch from master. When I run: git push heroku <mybranch> Nothing happens and my application is not deployed. Does anybody know wha
When I found my wrong mistakes at remote branch, I always delete this, squash locally and push again. Because I heard 'git push -f' was dangerous. However I noticed push result showing after git fetch
This question already has an answer here: Checkout remote Git branch 11 answers I have a remote branch: git branch -a *master remotes/origin/develop Can I checkout to remotes/origin/develop ?
Hi I have 2 local branches - master and test. I added a 20MB file to branch master and pushed it to the remote master. Now I merge master into test. and pushed test to the remote test. Now I have to
I am trying to quiet the git remote update command in my Ruby script. I used the --quiet flags of other Git commands like git checkout [branch_name]. For some reason Git doesn't have that flag when do
I've started work with a messy repository: the task is to remove all useless, merged-in branches. When I list the remote branches, I can see: remotes/origin/xx12 remotes/origin/xx13 remotes/origin/rem
Let's say if I did a git checkout -b bar foo or git checkout foo git branch bar both should have created a branch bar base on the branch foo. But let's say the next day, if I want to verify that bar
I have a remote and a local git repository. Local repository is clone from the remote. When I modify my local repository and commit to the master branch. Then I run git push to remote repository. Bu
I want to override a specific branch that im currently in, in order to override/replace everything from the remote repository server. If i do git pull on that branch i always get a merge conflict beca
As the title says I am trying to create a new branch in git on the remote repository. To do this I have previously been using the following command. git push origin origin:refs/heads/rounding_issue W
I cloned a repository and got a master branch. From the master I created a local branch abc. Now the remote may have progressed. The branches look like this: >git branch -a * abc master remotes/o
Quick sanity check - I wanted to create a new remote branch for myself. I want to do the following: git clone email@example.com:orange/orange.git git branch foo git checkout foo git push foo foo I'd lik
We are using two remote repositories on Bitbucket for the same project- where one is the one with most developments taking place at this moment and more people having access to it. The other is just f
I created two local git branches for this project (master and old). I recently push/pulled to/from Heroku as well and I was surprised to discover two branches associated with Heroku (branch and master
I couldn't find the exactly same problem so here is my question. I'm trying to deploy my app to heroku: First I run heroku create and I got this: Creating pure-citadel-7201... done, stack is cedar h
I'm attempting to deploy my code to heroku with the following command line: $ git push heroku master Permission denied (publickey). fatal: Could not read from remote repository. Please make sure you
git branch -a shows remotes/team/master and remotes/team/my-branch git remote rm team says error: Could not remove config section 'remote.team' (because I edited the config file with a text editor).
I am working with a remote git repo that does NOT support email notification upon commit. I am wondering if anyone know any means/tools to monitor and track the commit on one or more branches? Thanks
I have the branch master which tracks the remote branch origin/master. I want to rename them to master-old both locally and on the remote. Is that possible? For other users who tracked origin/master (
I want to know if there is a way on the git command line to copy the branch history from a remote repo. In other words, I want to copy the .git/logs directory from the remote to my .git/logs directory
I've done something incredibily stupid. I figured I should ask before I tried to fix it and accidentally make things worse. I tried to list all remote branches in my git repo: git branch remote Obv
I've cloned repository A's master branch from git and created my own branch called Li. I've made some changes a while ago and pushed the contents of local Li to remote Li. Now I've pulled some updates
Does anybody know the difference between these two commands to clone and track a remote branch? git checkout -b branch origin/branch git checkout --track origin/branch I think both keep track of the
Is it possible to pull from a remote repository but only selectively take files from that remote that I'm interested in? I don't want to simply pull down the entire branch. Thanks.
I created a branch, worked on it, merged it with the base branch and now want to delete it. The branch was created on the git remote server as well. Now when I ran git branch -d branch, it removed it