Git branch vs commit
I have master branch where i commited my last change now i run
git branch test
i deleted file README in the project folder
then i run
git checkout master
and there is no README file anymore.
I thought when you create new branch its like creating new commit?
I just created a new git repository and only did one commit. Now I do not see a master branch. These are roughly the commands I ran. git init git checkout -b dev (I made some changes to the monitored
What is the difference between git branch --track and git checkout -b --track, if there is any?
It happened somehow that I left the master branch and ended up on the no branch branch. How can I give this branch a meaningful name? In detail: Calling git branch shows * (no branch) master and wha
This question already has an answer here: Undo the last Git commit? 29 answers Delete commits from a branch in Git 12 answers How to delete commit that is pushed to the remote repository? 3
git add --all or git add -A followed by git commit -m commit message seem to produce a different result from git commit -am commit message when I thought they would produce the same final result.
Let's say I created a new branch my_experiment from master and made several commits to my_experiment. If I do a git log when on my_experiment I see the commits made to this branch but also the commits
I created a new file (with quite a bit of code and hard work) and committed it to the master branch of my git repo. A moment later I realized that I probably should've created a branch for the file. I
I have a repo with many different remotes where I've checked out a remote branch - git checkout remote/branch. I can get the currently checked out commit hash via cat .git/HEAD (since I'm always in a
When I squash commits in a branch (using git rebase -i), I'm always annoyed that the squashed commit is combined with the older commit instead of the newer commit. I don't understand why it was design
Hi guys I have a master branch that has a broken commit at the tip of the branch. The working version is the commit before that. How can I make the remote repository have the commit before that (C2)
Ok so I Have a branch in git that looks like this A-B-C-D-E and a branch that looks like this A-B-F-G I want to make a branch like this A-B-D-E-F-G I think tagging might be involved but I am rathe
I have my project + RestKit submodule. Error appeared when I changed RestKit settings. I added support armv6 and armv7 architecture. git add . git add -u git commit -m new # On branch master # Chan
I am new in git. I could not come back to master branch. I used several git bash command. I am mentioning all those with result below. $ git checkout master error:pathspec 'master' did not match any f
In following example tree: A-B-C-D-E (master branch) \ F-G-H (xxx branch) I'm looking for F - the first commit in xxx branch. I think that it is possible with: git log xxx --not master and the last
I have a branch which I've merged into master. On the branch, git log file shows a commit on February 9 On master, git log file does not show the commit on February 9th On master, git log does show th
This question already has an answer here: Can I recover branch after the deletion in git? 5 answers I have deleted my branch by mistake like this git branch -D demo but i want to recover it..i
Have looked around and can't find the answer to this! I am a complete git n00b and really grateful for anyone who can give me some pointers. I initially had one long branch of commits in my repository
I have dev-master branch & I have created new branch - feature_10 and started working on it for a feature. I have completed my task and then executed below command - git add *.java git commit -m
On branch 'first' I did: git add . git commit -m Finished first changes git checkout master git merge first But I forgot to do: git push To push the changes to github. I then created a new branch
I'm working with git for commit my branch. I have this problem pushing on git: $ git push origin HEAD:refs/for/master Counting objects: 117, done. Delta compression using up to 2 threads. Compressing
Why does git commit -am not work on my initial commit, but works thereafter? $ touch test.txt $ ls -a . .. .git test.txt $ git commit -am Initial commit # On branch master # # Initial commit # # Unt
Can I recover the following commit after a hard reset? Steps: 1) $ (master) // ....made a bunch of changes to files thinking I was working on a branch 2) $ git checkout -b 001-branch // copy changes t
I used git filter-branch and screwed something up and accidentally rewrote sections of the history I didn't want to. I was trying to change one name and accidentally changed every single commit (inste
I am using Git Bash and am trying to figure out what is happening when I type 'git commit -a'. Looks like VIM opens up to edit my commit message but how do I save and actually complete this commit? I
Is there a way to display the most recent commits of each branch in git? I have a codebase in git that I've set down for a while. There are several branches in it for different features. I need to go
I created a tag on the master branch called v0.1 like this: git tag -a v0.1 But then I realised there were still some changes I needed to merge into master for release 0.1, so I did that. But now my v
I have a master branch like this.. A--B--C--D--E--HEAD Is there any command that remove one of a old commit and retain the others, say commit C? finally it becomes like this A--B--D--E--HEAD I kno
I am attempting to revise a repo (not yet shared, so no worries about breaking anyone else's history) and git filter-branch is behaving in a rather odd fashion. $ git filter-branch -f --tree-filter /p
I'm trying to commit an automatic build file when doing a regular git push. So far I've tried to add the following to my git pre-push hook: git add build.js git commit -m automatic build file It
I'm merging changes from a stable branch back onto the development branch. I want it to be a real merge, by which I mean it should show a merge when I do git --graph --oneline. The catch is, I don't
I have the following branches master photos email My problem is that I have merged master branch into photos branch and the conflict occurred because I made changes to the same file. Then I reset --
In Git, what does deletion of a branch mean? Will it be gone from the repository? Or will it still be navigable to via git branch? What I really want to do is mark a branch as dead end, i.e., the
git-svn dcommit is trying to push to the wrong SVN branch. Here's what I did: git checkout -b branch_a svn/branch_a # git-svn clone prepended all remote SVN branches with svn/ git svn branch -m a mes
Is there any difference between git merge --no-commit and git cherry-pick --no-commit? And is there any difference in history if I commit after these two commands?
I usually create new branch from develop git checkout -b new-feature develop then after the last commit I merge back to develop git checkout develop git merge new-feature but this time I created new
From what I've seen the outlook seems pretty bleak, but just in case here are my requirements: Determine which branch a given commit originated in. Determine which commits originated in a given branc
Not understanding why my commit to remote git repo is not working. So I clone a branch from the remote repo git clone -b MYBRANCH firstname.lastname@example.org:/home/my.git I modify a file called test git diff sh
We maintain two versions of our application in two branches: free and master (master being the premium version of our application). These branches are fairly similar but the master branch has a few ex
In my local repo I have one commit with an incorrect commit message. I've already published the incorrect commit message with git push. Now the remote repo (which is GitHub-hosted) has the incorrect c
I have a commit template set up for git, and I would like to include the name of the current branch in it. I usually set up the branch to be the bug id, and it would help me with filling in boilerplat
git checkout -b some_branch master Is that equivalent to the statements: git checkout master git branch some_branch git checkout some_branch If not, then what is the difference? And in terms of merg
When I do git merge from another branch to current workspace, git sometimes makes a new commit: Merge remote-tracking branch xxx into xxx Sometimes, it does not: Fast-forward ... src files ... So wh
What's the difference between: git add . git commit -a Should I be doing both, or is that redundant?
I have a commit that has made changes to files A,B,C,D,E. This commit has been pushed to a remote server. I would like to take the changes to files C and E and move them to a separate branch as they w
This is my current repo. Z(master)---A---B---C---D(branch A) \ ---E---F(branch B) I want to merge commit A to master, can anyone advise how to do that? (desired) Z---A(master)---B---C---D(branch A) \
I use the git-flow to develop my project I often have hundreds of commit messages on the feature branch when developing. But once merge the feature branch into develop branch, I can only get one merg
Firstly, how can I see which branch I am currently on? I typed git branch but it returned * (no branch) master so then when I commit, where are these changes being committed to? Secondly, how can I
I'm looking for a git command to help me with my feature branches when they're ready to go into Master. This git command would squash all my changes on my branch into a single commit on top of master.
I have a developer who keeps committing, and every time he does - it does a git merge branch onto branch commit; every time. Even with his own code. Ie, my history looks like this almost all the time
If I do git log, is there any parameter I could specify to be able to tell from the output which branch every commit belongs to? Edit: to clarify, I understand that a commit may be part of two branche