How to operate a local branch in git
From here, http://cheat.errtheblog.com/s/git, I think I can recreate a branch in my local repository by
$ git branch mytestbranch
<then I can may changes as my experimental>
My question is how can
- I forget all the changes I made in the 'mytestbranch' branch? and switch back to my original 's stage/version of my repository?
- I keep the changes I made and move every thing to my 'main' branch?
I'd like to track a remote branch on SVN from within Git. I can see the basics of how to do this with the git-svn command, I was hoping to do something like the following: Git branch | SVN branch ----
Hey I am working on a local branch on an Android Project.I want to replace all code on my local branch with all the code on the remote master.When I try to do git pull origin master,it tries to merge
I have repository blog: blog ├─ master │ └─ _site │ └─ more folders │ └─ gh-pages I would like to map master:_site/ to the branch gh-pages. How would I do this using git?
There is an branch xyz for my master branch. I wanna create a new branch for the branch xyz. How can I do this?
Is there any git UI for managing just git branches, hidding commits? All currently available git clients show big log report with all commits in branches, so I might lost the focus of a branch that is
I've taken the following steps so far: Cloned a remote Git repo Branched the master branch to an experimental edited/tested/committed code in the experimental branch Now, I'm not ready to merge expe
After doing git reset --hard I expected to see 'HEAD is now at hexNumber' and then 'on branch master....nothing to commit. Instead I see wb316-mac03:MoodTrack student$ git reset --hard HEAD is now
I messed my local branch of a project, and i want to revert my local copy to the remote state. How i acomplish that simply goal?
I would like to know how to create git branches as below: --> I have a master branch --> I want to create branch1, make some changes and will push later. --> on same master branch i want to c
I have 2 branches local and remote like below. # dev master Right now I have merged changes local using git checkout master & git merge dev. It works great. Using git status I got below: Your bra
We're using GitHub here. I have a friend who branched our master branch, and I want to checkout his branch, make a few mods, then put them into his branch. My thought is to grab his branch using git c
Possible Duplicate: Deleting a badly named git branch I created a branch by mistake which starts with hyphen - , in starting character. For example git checkout -b -z/username/workname origin if I
It's possible that I'm not really understanding how git works here, but I have a development git branch, and then I created a new branch called development_cached I switched to the development_cached
One creates a new git branch: git checkout -b test and pushed it to origin: git push origin -u test and listing all the branches now I get: master * test remotes/origin/HEAD -> origin/master remo
I did a bit of development against the wrong branch in my local repository. I did a git branch without next doing a git checkout. The commands look something like this: #On branch development git bran
How to replace the trunk branch with another in svn repository using git-svn tool?
I have set up some remote tracking branches in git, but I never seem to be able to merge them into the local branch once I have updated them with 'git fetch'. For example, suppose I have remote branch
This is driving me crazy. I created a git repository in a Linux server hosted by my hosting company. I cloned it to a local copy using Eclipse EGit. I then created a branch in the original git reposit
I have Branch1, origin/Branch1, origin/Branch2, and origin/Branch3 And, I'm now on Branch1 git fetch and git pull would download the whole objects. It will cause I spend more time for downloading. The
I have a git repo with a dev and a master branch. Now I am trying to use a different revision of a submodule in each branch. So for example I do this: git checkout master cd submodule git checkout v1.
While working with git-svn, and a 'typical' svn repo /trunk, /branches/..., /tags/... How do I push a local branch to a new branch inside of /branches ?
I did a bunch of work on a local master that I decided needed a new branch. I created a branch diffraction on a machine at work and pushed it: $ git checkout -b diffraction $ git push Then I went to
Today I try to track a remote branch (specifically, Mapbox-ios-sdk's 23-callouts. So, what's the difference between the following three commands: git checkout remotes/origin/23-callouts git checkout -
My project uses the Andrew File System (AFS) and Git revision control. I made a clone of the project repository in my sandbox, and have been working on a number of feature requests in their own dedica
I need help understanding the following: I'm running a Jenkins job to build out a project hosted in a remote git repo. I am checking out code to a sub-directory, and checking out specific local branch
I'm not very familiar with git and just use the common commands. I forked a repository from github.com to my own account, and checked it into my local machine and create a new branch to make some deve
After messing up with my git branches a lot, I ended up with a stable develop branch and unstable master. I merged my stable commit of develop branch into master. But still my master is unstable. How
After my pull request has been reviewed by my buddies on Github I merge and remove my branch there (remote). How could I have my local repo to fetch this information and get Git to remove my local ver
See also: how do I get git to show me which branches are tracking what? How can I find out which remote branch a local branch is tracking? Do I need to parse git config output, or is there a command
I have Git configured so that when I run git push, it pushes changes to my GitHub repo. Until now I have only had a master branch. However, I have now created a local branch and committed to it using:
Can someone explain a tracking branch as it applies to git? Here's the definition from git-scm.com: A 'tracking branch' in Git is a local branch that is connected to a remote branch. When you push
I would like to merge from FeatureBranch to master, without doing ,,checkout master'' first. I've tried (being in FeatureBranch) git push . master but I got (to a degree of surprise) : Everything up-
I am setting my local branch to track remote branch like this: $ git branch --set-upstream foo upstream/foo But when I do git status, I get: $ git status # On branch foo # Your branch and 'upstream/f
I have forgot to create local branch and was working with remote. After making some changes, i by mistake using Eclipse Git plugin commit this branch in nowhere(obliviously there wasn't local branch).
I just wanted to create branch using git bash so anyone can give me guidance how to do it?
For some reason I can't checkout local branch in IntelliJ IDEA (123.150) git plugin. I suspect I simply don't understand how it's supposed to work. I thought that I have local branch if I cloned repo
I need to switch to a local brach master to a github branch feature/ABF-3-project-structure I run the below command. git pull feature/ABF-3-project-structure Please help me out. I have tried for at
$ git branch develop * feature/bug_76 master $ git branch -r origin/HEAD -> origin/master origin/develop origin/feature/implement_IBResponder origin/master origin/origin origin/sculptor_strategy L
This is the inverse of how to list commits on a branch but not merged branches, so I'll ask it in the same format. Let's say my git commit history looks like this: A---B---C---D---E---F master \ / X--
I've named by error a branch -update. When I try to rename it with git branch -m -update update I get the error error: unknown switch 'u'. Is there a way to rename the branch? Thanks!
I have a repository with one branch called testing and on the server I want to have 2 separate folders - one that pulls from the master branch (git pull origin master) and the other pulls from the tes
I'm experimenting with some githooks, so I have setup a local bare repository with a symlink from hooks to the hooks stored elsewhere. I have pushed the master branch to the git repo and, of course, t
When I want to merge to a local branch I do this: git checkout master git pull origin master git checkout my_branch git merge master Is there a way to merge from the master on the repository into my
I have a local git repository which tracks a remote SVN repository via git svn. I have made and committed some changes in the local git repository, but now I'd like to create a branch that reflects SV
I have a remote tracking branch tracked locally in my local repository using 'git branch -b branch-name origin/branch-name'. My remote branch is test2/test2 (origin/branch-name) which is being tracked
I'm working to deploy a Django app. The app built on a Github OS project. I have this stored locally as the Master branch. $ git branch * master customized - customized with local dev settings webfact
I have a git repository which tracks an svn repository. I cloned it using --stdlayout. I created a new local branch via git checkout -b foobar Now I want this branch to end up in …/branches/foobar in
This is strange. I'm trying to make a script that will checkout every local branch and rebase origin/master onto it. So this is my script: for br in `git branch -l`; do git checkout $br git rebase or
I'm using Git Flow for my project, and have completed the git flow feature finish step that merged my feature branch into my develop branch. I then performed git push to GitHub, but on GitHub I still
How can I differentiate between two local branches in git ? How can I copy one local branch to another local branch ? In general how can I perform difference operation between two local branches on m