Git command to commit all changes including files removed or created
After making changes to files already tracked by
git I usually do a:
git commit -a -m "a message describing what you did"
git push origin master
to commit and then push all changes to my Github account. The first command however does not work for commiting files either added or removed. To do that I would have to first type:
git add -A
as mentioned here: How to commit and push all changes, including deletes?.
In this other question Git Commit all the files using single cmd the accepted answer indicates that the only way to apply the full commit (ie: including files added or removed, not only edited) and then the push is by combining them with the
&& command like so:
git add -A && git commit
which in my case would look like:
git add -A && git commit -a -m "a message describing what you did" && git push origin master
Now for the question(s): is this large command correct? Is there a way to create a new
git command to apply these three commands all at once? Furthermore: is this merging of commands recommended or discouraged? If so, please state the reason.
I immediately regret this decision: Edit last pushed commit's message.
What's the best way to move your last git commit back into the Changes not staged + Untracked files areas (with the commit in question being not-pushed / only in your local repo, effectively remov
I'm pretty new to Git (and version control in general) and am ashamed to say that this problem has been going on for a while now. Occasionally, after adding changes, git will delete everything from my
I accidentely said git rm -r .. How do I recover from this? I did not commit. I think all files were marked for deletion and were also physically removed from my lcoal checkout. EDIT: I could (if I
I'd like to get a list of all the files present in git at a given point. I've tried issuing something like: git show --pretty=format: --name-only f21b25e76d146 This only shows the files that where
I've been working on my code base for a few days now. I've modified about 15 files, making various changes to each. Now I'd like to commit all my work, but I would like to break down my work into mult
I have a repository cloned from GitHub, and I made changes to file A, however Git is detecting changes to file B,C and D. All three files are detecting the changes as basically the entire contents of
I need to get patch file for inital commit (which is not empty) for our review process, but I'm confused as git format-patch command only makes it from branch that is on initial commit not including i
For the second time today git commit -m don't quit me now deletes my entire repo. So it goes: $ git add . $ git commit -m please, be gentle [master 7af0e9c] please, be gentle 140 files changed, 0
I'd like to add an automatically generated file to the same commit using a pre- or post-commit hook in Git, dependent on the files that were modified in that commit. How would I go about this? I've tr
Is there a way to make git output a list of files of a commit like git diff --name-only b242091~1 b242091 , but that will print an additional column with the mode in which the files were added (new,
By mistake I rm -rf a directory in my git repository. The changes are not commited and I wanted to revert this change and go back to my last git commit. # On branch release-1 # Changes not staged for
we are a group of developers working on the same set of files. I want to make sure that no one does a git commit -a -m or git commit -am The developers including me have this bad habbit of git commit
I need delete file from filesystem which is tracked by Git repository and I want leave that file in Git repository unchanged (no commit to repo). It's easy for locally modified file where I'm using as
There are multiple questions on Stack Overflow addressing the problem of staging and committing only parts from files. However, I can't make it work. How can I commit only part of a file in git Let'
I have two authoritative git repositories that I need to push to. Pushing to both is done by adding a line to the .git/config file: [remote origin] url = repository1 url = repository2 as discussed
I am using Git to version control a large java project. Is it possible to know at which commit a certain method is added or removed from a certain class?
There is a big commit long ago in the past and a lot of change happened since then. How do I list all files those don't change of that commit up to now?
git revert HEAD reverts all changes, but what I want to revert the ones except my go extension files? I want to revert all changes except the one with *.go I tried git revert HEAD ^*.go git revert HE
The command git show --pretty=format: --name-status bd61ad98 will show a list of all the files modified/added/deleted in the last commit where bd61ad98 is the commit ID. The output looks like this:
Possible Duplicate: Git: removing selected commits from repository I'd like to remove selected commmit from linear commit tree: R->A->B->C->D->HEAD I want to remove commit C and all c
I can make a commit with git with the following command: git commit -a However then I have to enter the comment with VIM. Id rather do it all with one command so ive tried the following: git commit -
I know that git ls-tree -r --name-only --full-tree <sha1> will give me the list of all files included in a given commit, while something like git show --stat --name-only --pretty=format:'' <
What the title says has always worked for me, however suddenly my modified files are not being added anymore, why? git status On branch master Changes not staged for commit: (use git add <file&
I have tried git commit -v ubuntu@ip:~/agile$ git commit -v # On branch master # Changes not staged for commit: # (use git add <file>... to update what will be committed) # (use git checkout
I created and switched to a new branch and made some changes that haven't been commited. How do I return to the state of my last commit? I used git reset --hard HEAD but all the changed files are sti
This question already has an answer here: Git commit to common submodule (master branch) 1 answer I have, in my naivety, set up a git submodule and treated it like a Subversion external - i.e.
I have tons of files in my repo, and sometimes I work on 20 files and I want to commit all of them. But, I would like to add a message for each. How can I add all of these files that have been updated
command sequence mkdir topdir mkdir another-git-directory touch fileC touch fileD git add . git commit -m sub-dir init cd .. touch fileA touch fileB git add . git commit -m top-dir init git ls-fi
for example I want to know all changes made on a certain subfolder or maybe a specific file. Is there a command line to do that ? Thanks.
I have a project where I made changes, and want to send them to another user, using git send-email feature. I found that it works by sending patches (created by git format-patch of each commit). Is it
Here's my current process: I checkout a repo using the jenkins git plugin (no branching, just a checkout) In the build steps make multiple changes to source files, including sometimes creating new fi
I tried to clean my git up a bit, so I untracked all files with git rm -r --cached . Afterwards, I tried to add them again with git add -A or git add . but, neither of them seem to work, because wh
I accidently deleted source directory.. I thought I was deleting another directory. But I have last commit that is where I need to revert back. I have two branches: master dev1 On dev1: git add . g
I have read a few different threads on removing large binary files from git commit history, but my problem is just a little bit different. Hence my question here to understand and confirm the steps--
Possible Duplicate: How do I get git to use Textmate as my default editor? When I type git commit...it launches TextMate and I see all the changes in the file commented out. But then at the command
This question already has an answer here: git: can i commit a file and ignore the content changes? 2 answers Untrack files from git 3 answers I need to ignore files in git! I don't think ig
I'm looking for a way to 'hide' minor changes made to a few files in Git, such that they will not show up in git status until a different change is made to those files. Example: I have a java file whe
I have written code in window batch file (eq. getFiles.bat ) that get all files within select date range. eq. xcopy /S /D:01-10-2011 *.* C:\todaysFiles But I want get all files in between two dates
So, I have two git branches, master and testing. I checkout testing. I make some changes that are only halfway done and not ready to even stage let alone commit, I'm just screwing around. If I checkou
I checked out an existing branch, lessons, and started to change some files, and deleted one. After doing git add . and git commit, some changes where committed, but others were separated at the end o
In the GitFaq I can read, that Git sets the current time as the timestamp on every file it modifies, but only those. However, I tried this command sequence (EDIT: added complete command sequence) $
I am trying to do the commit should pass all tests to succeed automation in my rails project. The problem is that I use git add --patch quite a lot before I commit and I want my tests to only run on t
With both GIT tools and command line, what is the easiest way to find out which commit removed a particular word from a file?
Sometimes someone on our team does a git push and breaks the build because his local build works but he has forgotten to commit all his local modifications and untracked files to git before he pushes.
I tried to add all files, but am not able to add files. What do I need to do? ➜ dotfiles git:(master) git add . ➜ dotfiles git:(master) git status # On branch master # Changes not staged for commit: #
I'm new to git. I'm working on a project, the files under the project directory are commited, and I just added many files by mistake. They are neither added to git nor commit. Now I want removed them,
When I try to commit my project in PHPStorm's Git plugin it'll commit as shown below. But when I'm at this screen and I click Push it'll then say No changes detected instead of pushing. Am I missing
I'm not sure I understand what the command git commit -am commit_message does. I used it hoping that it would do: git add . git commit -m commit_message But when I pushed to github, I noticed that
Which command do i use to revert the changes made by the last commit? The commit was already pushed to the remote server.
Is there a way to set the file creation date of all committed files to the time of the latest commit?